Three important points for control in injection molding processing

When we carry out injection molding processing, whether it is mold debugging or formal production, it is necessary to control the mold to ensure normal production and mold quality. So, what are the key points of mold control? Let's take a look at the following content together.
1： The quality of plastic parts needs to be carefully controlled
It can mainly be divided into scale and appearance quality control. The dimensions of the component cannot exceed the specified tolerance. If it does, we need to make reasonable modifications to the parts that exceed the tolerance in a timely manner. The quality of appearance requires process technology to prevent obvious defects such as burrs, cracking, and peeling of the parts. When the process technology is difficult to solve, the mold can be repaired to improve the surface quality of the parts, or the surface of the mold can be treated to further enhance its hardness.
2： Control of production power
The forming and quality of the workpiece are largely affected by the speed of the press machine. When the press machine is used at a low speed in the drawing process, the formability of the workpiece will be better. To improve the production power, the press machine speed needs to be increased. However, the increase in speed will increase the probability of cracking of the workpiece. Therefore, the staff should control the press machine speed well. 3： Control of capital
Ensuring the quality and appearance of the parts, avoiding excessive defective products, and thus avoiding repeated processing. Reasonable use of technical processes can achieve the goal of avoiding unexpected situations in the parts. While saving costs, it is important to ensure that the dimensional accuracy and quality of the components meet the standards.