Car Door Map Pocket Mold
Keyword
Classification
Product Details
Description
Car Door Map Pocket Mold must be smooth, no stuck, no abnormal sound, and the ejector plate is reset to the end. If the ejector mechanism and the slider have interference, there must be protection measures, and the top plate must have a reset stroke switch. The return spring and the slider spring use standard parts and meet the design requirements, and the ends are not polished or cut. The ejector pin and the return pin head shall not be gasketed, welded, polished, and the front end of the return pin shall not be welded.
Parameter
|
Car Door Map Pocket Mold |
|||
|
Core/Cavity Steel |
2738 |
||
|
Mould Base |
LKM |
||
|
Mould size |
650*400*550 |
||
|
Cavity |
2 |
||
|
Injection System |
Cold Runner |
||
|
Mould Life |
1,000,000 shots |
||
|
Plastic material |
PP |
||
|
Design Software |
NX Siemens, PROE, Cimatron, Solidwork,Catia and Auto-CAD |
||
|
Delivery Time |
65 days |
||
|
Payment |
By T/T |
||
Precautions
The Car Door Map Pocket Mold is connected to the standard and the connecting lines and fittings meet the standards.
Its oil and water passages are unobstructed, free of debris and meet the requirements of the drawings.
The external plug of the mold must be plugged with a screw, and the plug is recessed into the plane 1-2MM. The nozzle model conforms to the standard or customer requirements and must not be damaged.
The waterway is sealed reliably, without water leakage, water seepage, etc., and is easy to overhaul. There should be no iron filings left in the waterway to affect the flow of hot and cold water. The test water pressure is more than 30 minutes at 10 bar without leakage.
If there is an inlet and outlet joint on the side of the mold, a diversion groove should be opened on the side of the mold to prevent water from flowing into the mold.
recommend products
Welcome your message consultation
*Leave your contact information to get a free product quote